Roof inspection and leak detectionNashville and Middle Tennessee · homes and commercial buildingsFree toolsWhere roofs leakService areas
Drone aerialSERVICE E-03 · Check the roof under your panels, and the penetrations that hold them

Solar Panel Roof Inspection in Nashville and Middle Tennessee

An inspection of roofs with solar installations: mounts, flashings, sealants, wiring penetrations and the roofing under and around the panels.

  • Specialty and Seasonal Inspections
  • Seen from above
  • Middle Tennessee
Solar Panel Roof Inspection in Nashville and Middle Tennessee
The service

Solar Panel Roof Inspection, explained.

Solar panels turn a roof into a platform, and every mount is a hole. The roof under the panels is hard to see and hard to maintain, so problems there can go unnoticed. Flashings at mounts, wire penetrations and shingle damage around standoffs are the places to look.

We use a drone and close-up photography to inspect around and between panels, examining mounts, flashing, sealant and roofing condition. We note shading debris, wiring and areas where water can pool. The report is useful before installing panels, after installation and when a leak appears under an array.

Signs this service fits

  • You have solar panels or plan to install them
  • A leak has appeared under an array
  • Panels were installed recently
  • The roof under the panels is aging
Is it right for your roof?

A good fit, and what to know.

We would rather you hear the limits from us than discover them later.

A good fit when

  • You are considering or have solar panels
  • You want the roof checked first
  • You suspect a leak near mounts

Worth knowing

  • We do not test solar electrical performance
  • Panels can hide parts of the roof
What you get

Why do it this way.

Mounts and flashings checked

The usual leak points are examined.

Before and after documentation

Useful for installation disputes.

Drone-friendly

Panels can make walking difficult.

Leak tracing support

Find leaks beneath arrays.

Try it: Inspection Method Matchmaker

How it runs

From first look to finished report.

A clear sequence for every visit.

  1. 01

    Review the layout

    We note the array, mounts and roof layout.

  2. 02

    Inspect mounts and flashings

    Standoffs, flashing and sealant are examined.

  3. 03

    Inspect roofing and wiring

    Roofing around and under panels and wiring penetrations are checked.

  4. 04

    Report

    You receive photos and findings with recommendations.

Questions

Solar Panel Roof Inspection FAQ.

Should I inspect the roof before installing solar?

Yes. It is far easier to repair or replace the roof before panels cover it.

Can panels cause leaks?

Poorly flashed mounts can. Good installation and inspection reduce the risk.

Do you inspect the panels themselves?

We inspect the roof and mounts. Electrical and panel performance are for solar professionals.

Know your roof. Before the next storm.

Tell us about your roof and what worries you, and we will suggest the right inspection. Most leaks announce themselves long before the ceiling does.

Book an inspection

See what your roof is hiding.

Tell us about your roof and what worries you, and we will reply with the right kind of inspection and a suggested next step. Stains, storms, sales or a routine checkup, we start the same way.

Prefer to talk? Call us(615) 431-3789
  • Hands-on, drone, infrared and moisture methods, matched to your roof
  • A photo report in plain English, with priorities
  • Options explained before any work is scheduled

Request your inspection

We read every request and reply with a suggested next step.

Your details go straight to our team and are never sold. Prefer to talk? Call (615) 431-3789.

CallBook Inspection